Xerox WorkCentre C226 manual Manually Setting the Scanning Size, You to step

Manually Setting the Scanning Size

3. Touch the desired original size key.

The original size key you touched are highlighted.

	Original Size					OK
Auto			Manual			OK
A5		A5R		B5		B5R
A4		A4R		B4		A3
AB					Extra Size
			Inch

If you wish to select an inch size, touch the [INCH] key and then touch the desired original size key.

			Original Size						OK
		Auto			Manual				OK
	51/2 X81/2			51/2 X81/2 R			81/2 X11	81/2 X11R
81/2 X13				81/2 X14		11X17

AB Inch Size

[INCH] is highlighted and inch size keys are displayed.

To return to the AB palette, touch the [AB] key once again.

If you wish to select a custom size, touch the [EXTRA SIZE] key and enter the size of the original.

Original Size OK

AutoManualOK

X210 (10mm 432)

Y297 (10mm 297)

AB Inch Extra Size

Touch the [X] key and use the or keys to set the length in the X direction, and then touch the [Y] key and do the same for the Y direction.

The length can be within the range 10 to 432 mm (1/2" to 17") in the X direction and 10 to 297 mm (1/2" to 11-5/8") in the Y direction, set in increments of 1 mm (1/8").

Depending on the amount of memory installed, it may not be possible to scan some original sizes (page 4-1).

4. Touch the outer [OK] key.

ManualMANUAL

B5

	You will return to the initial screen.
	Touching the inner [OK] key in the step above returns
OK
	you to step 2.
OK

B5R

The selected size appears in the top half of the [ORIGINAL] key.

Lower

Resolution

Programmed

File Format

A4

Original

NOTE: You can return to automatic detection by pressing the [CLEAR ALL] key.

Xerox WorkCentre C226 User Guide 4-35