Xerox WorkCentre C226 manual Condition Settings Sub Address

Transmission Between Machines Supporting F-codes

Entering (Dialing) a Fax Number with a

Sub-Address and Passcode

When transmitting to a memory box in another fax machine, the sub-address and passcode must be entered after the other machine's fax number. Enter the other machine's fax number as explained for a normal transmission or for a polling operation (see “Using the Polling Function” on page 5-36),and then enter the sub-address and passcode as follows:

1. Dial the fax number of the other machine, or touch a one-touch key.

Corpo.Tps

Xerox Group

If the condition settings screen appears, touch the [ADDRESS DIRECTORY] key to display the address

Spe

directory screen.

If the sub-address and passcode have been pro- grammed into the one-touch key, the following steps are not needed.

2. Touch the [SUB ADDRESS] key.

Condition

Settings

Sub Address

Address

When the [SUB ADDRESS] key is touched, a slash "/" appears at the end of the fax number. If you make a mis- take, press the [C] key to clear the mistake.

3.Use the numeric keys to enter the sub-address of the other machine's memory box (max. 20 digits).

If you make a mistake, press the [C] key and re-enter the correct digit(s).

4.Touch the [SUB ADDRESS] key once again.

A slash "/" appears at the end of the sub-address.

5.Use the numeric keys to enter the passcode of the other machine's memory box (max. 20 digits)

If a passcode has not been established for the other box, this step is not necessary.

NOTES: • You can program a sub-address and passcode into a one-touch key along with the fax number (see “Storing One-Touch Keys” on page 5-68).

•Manual transmission (on-hook dialing) using a sub-address and Passcode Is Not Possible.

Xerox WorkCentre C226 User Guide 5-51