Xerox WorkCentre C226 manual Using the Saddle Stitch Finisher

General Information

Using the Saddle Stitch Finisher

Touch the [More...] key in the Output display on the main screen of copy mode to dis- play the screen that allows selection of sort, staple sort, centreline stapling, group function, and the output tray.

Output

Sort

Staple

Sort

Offset

Finisher Tray

OK

Centre

Tray

Saddle

Stitch Punch

Group

[GROUP] key When Group is selected, all copies of the same original will be grouped.

[STAPLE SORT] When Staple Sort is selected, sorted sets will be stapled and delivered to the offset key tray. (They will not be offset stacked.)

[SORT] key When Sort is selected, sets of copies will be sequentially delivered.

[FINISHER When the offset function is selected, output goes to the offset tray. (The offset tray is TRAY] key automatically selected when the staple sort function is turned on.)

[OFFSET] key The offset function operates when "Yes" is selected, and doesn't operate when "No" is selected. (The offset checkmark is automatically cleared when the staple sort function is turned on.)

[CENTRE TRAY] If the centre tray is selected, output paper will be delivered to the exit tray located key above the main unit.

[OK] key Touch to close the [OUTPUT] screen and to return to the main screen.

[SADDLE When saddle stitching is selected, the copies will be stapled at the centre and deliv- STITCH] key ered to the saddle stitch tray.

Touch this key to display the pamphlet copy setting screen (page 2-71).(This is only possible when a checkmark appears in the checkbox of the [AUTOMATIC SADDLE STITCH] key operator program)

[PUNCH] key If the Saddle Stitch Finisher is equipped with a hole Punch Module, printed paper can be hole punched and delivered to the offset tray.

* When one of the functions is selected, it is highlighted.

1-60 Xerox WorkCentre C226 User Guide