Xerox WorkCentre C226 manual Settings key, Start key Clear ALL key

Part Names and Functions

[JOB STATUS] Press to display the current job status. (See page 1-17.)key

[CUSTOM	Use to adjust the contrast of the touch panel or to set key operator programs. (See
SETTINGS] key	page 1-37.)

Numeric keys Use to select the number of copies and to make numerical entries for setting opera- tions.

[] key ([ACC.#- This is used when the copy, network scan*1, and fax*2 functions are used. If the audit- C] key) ing mode has been set, press this key to close an open account after finishing a copy

job. For setting of the auditing mode, see page 1-18.

[#/P] key This is used as a program key when using the copy function, and to dial when using the fax function*2.

[C] key Press to clear a copy quantity entry. If this key is pressed while the DADF is being used, any originals in progress will be automatically output.

This key is used in copy mode, network scanner mode*1, and fax mode*2.

[BLACK COPY

START ( )] key

[CLEAR ALL] key

[COLOUR COPY

START ( )] key

This is used to make black and white copies and to scan a black and white original when the network scan function is used. This is also used to scan an original to be

faxed using the fax function*2.

This key is used in copy mode, network scanner mode*1, and fax mode*2. This returns all copy mode settings to the default settings. However, the touch panel display mode will not be changed. When beginning a copy job, press this key.

This is used to make full-colour or single-colour copies and to scan a colour original when the network scanner function is used.

*1 When the network scanner option is installed.

*2 When the fax option is installed.

Xerox WorkCentre C226 User Guide 1-15