Xerox WorkCentre C226 manual Normal Copying

Normal Copying

4. Select the desired output mode. (See page 2-18.)

When a document is detected on the document glass, the group mode will be automatically selected.

To select sort copy, touch the [More...] key in the Output display, then touch the [SORT] key on the displayed screen, and then touch the [OK] key.

NOTE: If the [SORT] or [GROUP] key is touched, its corresponding icon is highlighted. To clear the icon display, press the [CLEAR ALL] key. Note that all selections made to that point will be cancelled.

5. Use the numeric keys to set the desired number of copies.

Up to 999 can be set.

If you are only making a single copy, the copy can be made with the copy number display showing "0".

Use the [C] (clear) key to cancel an entry if a mistake has been made.

6.Press the [COLOUR COPY START ( )] or [BLACK COPY START ()] key.

Replace the original with the next original and press the [START] key. Repeat this operation until all originals have been scanned.

7.Touch the [READ-END] key.

If you selected "Sort" for the output in step 4, it is neces- sary to touch the [READ-END] key.

Place Next Original. Press [Start].

When Finished, Press [Read-End].

Read-End

Xerox WorkCentre C226 User Guide 2-23