Xerox WorkCentre C226 manual 123456/987654

Programming, Editing, and Deleting F-Code Memory Boxes

1.Touch the [RELAY BROADCAST] key in step 3 of “Programming an F-Code Memory Box” on page 5-82and store a box name, sub-address, and passcode.

2.Touch the [RECIPIENT] key.

The address selection screen appears.

Box Name	Fax Information
Sub Address	123456/987654
Recipient

3.Touch the one-touch keys you wish to include as end receiving machines.

Touch indexes and the keys as needed.

Direct Address / Group

Select Address.

AB

	C Group			Xerox Corporation
	Corpo.Tps
								Address Review
Frequent Use		ABCD	EFGHI		JKLMN	OPQRST	UVWXYZ
									ABC	Group

•The selected one-touch keys are highlighted and programmed as end receiv- ing machines.

•If you touch an incorrect key, touch the key again to remove the highlighting and delete the destination.

4.To check the destinations that have been selected as end receiving machines, touch the [ADDRESS REVIEW] key.

N

Address Review

OPQRST UVWXYZ ABC Group

You can delete a destination from the list of end receiv- ing machines by touching it. When the confirmation mes- sage appears, touch the [YES] key to confirm the deletion.

5.Touch the [OK] key in the screen of step 3.

You will return to the screen of step 2 and the number of stored as end receiving machines will appear.

6.To exit, touch the [EXIT] key. To program another memory box, touch the [NEXT] key.

Touching the [EXIT] key returns you to the screen of step 3 on page 5-82.

Touching the [NEXT] key returns you to the screen for programming a new memory box (the screen of step 4 on page 5-82).

Xerox WorkCentre C226 User Guide 5-87