Xerox WorkCentre C226 manual Automatic two-sided copying from the Dadf, Touch Offset Touch OK

Normal Copying

3.Touch [OFFSET].

4.Touch [OK].

	Ready To Copy.					0
				Interrupt
Output
					OK
			Offset
			Centre
Sort		Left Tray

Tray

Group

Selecting the output tray

When the [LEFT TRAY] key in the above illustration is highlighted, copies are output to the tray on the left side of the machine (the left tray). When the [CENTRE TRAY] key is highlighted, copies are output to the centre tray. Touch the key of the tray you wish to use for copy output.

Turning on the offset function

The offset function operates when a checkmark appears in the [OFFSET] checkbox, which is displayed by touching the [CENTRE TRAY] key. (If a checkmark doesn't appear, touch the checkbox.)

Offset width: Approximately 30 mm (1-3/10")

(A3W (12" x 18") paper cannot be offset.)

Automatic two-sided copying from the DADF

When a Duplex Module/2-Tray Unit and a Duplex Bypass/Inverter Unit are installed, the following automatic two-sided copy functions are possible. The copy paper is turned over automatically, allowing easy two-sided copying.

NOTE: Certain restrictions exist depending on the amount of memory installed and the copy settings. (See “Copy mode output restrictions” on page 2-16and “Guidelines for the number of scannable originals during sort copying” on page 2-17.)

Xerox WorkCentre C226 User Guide 2-19