Xerox WorkCentre C226 When using the document glass, Setting Originals, How to place the original

Setting Originals

2. Place the originals face up in the DADF tray.

Set the originals all the way into the feed slot. Do not exceed the maximum height line marked on the original guide.

When using the document glass

Open the document cover, place the original face down on the document glass, and then gently close the document cover.

Original size detector

NOTES: • Do not place any objects under the original size detector, because they may

damage it or the original size may not be detected properly.

•If an original has been placed in the DADF tray of the DADF, remove it. Otherwise the original in the DADF tray will be scanned instead of the original on the document glass.

[ How to place the original ]

Place the original in the appropriate position shown below according to its size. (Cen- tre the original on the centring scale.)

Original scale

Centring scale

A4 or 8½x11	A3 or 11x17
	B4 or
	8½x14
A5 or
5½x8½

Original scale

Centring scale

A4 R or

8½x11 R

Xerox WorkCentre C226 User Guide 2-5