Xerox WorkCentre C226 manual Interrupting a Copy Run

Interrupting a Copy Run

Interrupting a Copy Run

INTERRUPT can be used to temporarily stop a long copy run so that another copy job can be run.

It is not possible to interrupt an automatic two-sided copy job.

1. Touch the [INTERRUPT] key.

If the [INTERRUPT] key does not appear, interrupt copy- ing is not possible.

Cancel

When the [INTERRUPT] key is touched in step 1, the [INTERRUPT] touch key will be replaced by the [CAN- CEL] key as shown in the illustration.

NOTES: • If you touch the [INTERRUPT] key when the account counter function is turned on, the display will prompt you to enter your account number. Enter your account number with the numeric keys. The copies you make will be added to the count of the entered account number.

•If the [INTERRUPT] key is touched while an original is being scanned, the interrupt state will begin after scanning is completed. If the [INTERRUPT] key is touched during copying, the interrupt state will begin after the copy is completed.

•Interrupt copying is not possible during automatic two-sided copying using the optional Duplex Module/2-Tray Unit. In addition, automatic two-sided copying is not possible during interrupt copying.

2.Place the original for the interrupt copy job in the DADF or on the document glass (pages 2-4 to 2-10).

If a black and white copy job is being interrupted to run another black and white copy job, the number of origi- nals that can be copied in the interrupt job is 35. (based on text original (A) on page 2-17)

Xerox WorkCentre C226 User Guide 2-77