Xerox WorkCentre C226 manual Problems and Solutions, Problem Check Solution

				Problems and Solutions
	Problem	Check	Solution	Page
Printing does not take		Does a message appear in	Restore printing capabil-	“When an Alarm
place after reception.		the display instructing you to	ity as instructed by the	Sounds and a Warning
		add toner or paper? (Printing	display message. Print-	Message Is Displayed”
		is not possible.)	ing will begin	on page 5-98
A received image		Was the wrong side of the	Check with the operator	_
prints out blank.		original scanned in the trans-	of the transmitting
		mitting machine?	machine.
The received image		Is the original faint?	Ask the other party to re-	_
is faint.			send the document
			using a suitable expo-
			sure setting.
The received image		Were line conditions poor	Ask the other party to	_
is distorted.		due to thunder or another	send the document
		reason?	again.
White or black lines		Is the document glass dirty?	Clean the document	Pages 2-81and 2-82
appear in the trans-			glass .
mitted image.
	A dial tone is not	Is the volume set to "low"?	Set the speaker volume	“Speaker volume set-
	heard through the		to "medium" or "high".	ting” in the “Fax Unit”
	speaker.			section of the Work-
				Centre C226 System
				Administration Guide
Telephone	A ringing sound is	Has the ringer volume been	Set the ringer volume to	“Speaker volume set-
	not made.	turned off?	"low", "medium", or	Administration Guide
				ting” in the “Fax Unit”
			"high".	section of the Work-
				Centre C226 System

Xerox WorkCentre C226 User Guide 5-101