Xerox WorkCentre C226 manual Setting the paper type except the Bypass Tray

Loading Paper

Paper that can be used for automatic two-sided printing

Paper used for automatic two-sided printing (paper that can be fed through the Duplex Module) must meet the following conditions:

Paper type:	Plain paper as specified on page 1-30.
Paper size:	Must be one of the following standard sizes: A3, B4, A4, A4R, B5,
	B5R or A5 (11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x
	11"R, 7-1/4" x 10-1/2" or 5-1/2" x 8-1/2")

Paper weight: 64 to 200 g/m2 or 17 to 54 lbs.

NOTES: • Special papers as described above cannot be used for automatic two-sided

printing. Heavy paper up to 200 g/m2 (54 lbs.) can be used.

•The image quality and toner fusibility of special papers may change due to ambient conditions, operating conditions, and paper characteristics, resulting in image quality inferior to that of Xerox standard paper.

•Various types of plain paper and special paper are sold. Some of these cannot be used in the machine. Please consult your retailer or your dealer when buying paper.

Setting the paper type (except the Bypass Tray)

Follow these steps to change the paper type setting when the paper type has been changed in a paper tray. For the paper types that can be used in each tray, see page 1-30.To change the paper type setting for the Bypass Tray, see page 1-35.

1. Press the [CUSTOM SETTINGS] key.

		The custom setting menu screen will appear.
/
2. Touch the [TRAY SETTINGS] key.
Total Count	Contra	The paper tray selection screen will appear.
Tray Settings	Addres
	Contro
Select	Key

Xerox WorkCentre C226 User Guide 1-33