Xerox WorkCentre C226 manual Operational Safety Information, Do These, Disconnect Device

•Do not override or disable electrical or mechanical interlocks.

•Do not obstruct the ventilation openings.

•Never push objects of any kind into slots or openings on this equipment

•If any of the following conditions occur, switch off the power to the machine immediately and discon- nect the power cord from the electrical outlet. Call an authorized local service representative to correct the problem.

-The equipment emits unusual noise or odors. -The power cord is damaged or frayed.

-A wall panel circuit breaker, fuse, or other safety device has been tripped. -Liquid is spilled into the copier/printer.

-The equipment is exposed to water.

-Any part of the equipment is damaged.

Disconnect Device

The power cable is the disconnect device for this equipment. It is attached to the back of the machine as a plug-in device. To remove all electrical power from the equipment, disconnect the power cable from the electrical outlet.

Operational Safety Information

To ensure the continued safe operation of your Xerox equipment, follow these safety guidelines at all times.

Do These:

•Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet checked by a qualified electrician.

•This equipment must be connected to a protective earth circuit.

This equipment is supplied with a plug that has a protective earth pin. This plug will fit only into an earthed electrical outlet. This is a safety feature. To avoid risk of electric shock, contact your electrician to replace the electrical outlet if you are unable to insert the plug into it. Never use a plug that lacks an earth connection terminal to connect the product to an electrical outlet.

-Always follow all warnings and instructions that are marked on or supplied with the equipment.

-Always exercise care when moving or relocating equipment. Please contact your local Xerox Service Department, or your local support organization to arrange relocation of the product to a location outside of your building.

-Always locate the equipment in an area that has adequate ventilation, and the room for servicing. See Install guide for minimum dimensions.

-Always use materials and supplies specifically designed for your Xerox equipment. Use of unsuitable materials may result in poor performance.

-Always unplug this equipment from the electrical outlet before cleaning.

Xerox WorkCentre C226 User Guide xvii