Xerox WorkCentre C226 manual This machine

Fax Unit

be programmed to control access to the box. (A sub-address must be programmed, however, a passcode can be omitted.)

	MEMORY
0001	11245	7732123
XEROX	Document	Product Planning	7732123
	Group 1	Dept.	Product Planning
3321		1115	Dept.
3333	4444	010	1115
Department	Reports	Section
Manager		Manager
	11111111	123456
	Public Box*

7732123

Product

Planning

Dept.

Sub-address (location in memory)

Select any number up to 20 digits.

Box name (used to manage boxes in your machine)

Select a name of up to 18 characters.

Passcode (key)

Select any number up to 20 digits. (Not required)

1115

*The Public Box is used for normal serial polling (see“Using Polling Memory” on page 5-38).

When communication occurs involving a memory box, the communication will only take place if the sub-address and passcode that the other machine sends match the sub-address and passcode programmed in your machine for that box. Therefore, to allow communication, you must inform the other party of the sub-address and pass- code of the memory box. Likewise, to send a document to a memory box in another machine or use polling to retrieve a document from that memory box, you must know the sub-address and passcode of that memory box. (Box names are used only to man- age boxes in the machine; you do not need to inform the other party of a box name the other party only needs to know the sub-address and passcode.)

This machine uses the term "sub-address" for the location of the memory box and the term "passcode" for the authorization number of the memory box; however, the prod- ucts of other manufacturers may use different terms. When asking the other party for a sub-address and passcode, you may find it useful to refer to the 3-character alphabet- ical terminology used by the ITU-T.

This machine		ITU-T
	F-code polling memory	F-code Confidential box	F-code Relay Broadcast
	box		Function
Sub-address	SEP	SUB	SUB
Passcode	PWD	SID	SID

5-50 Xerox WorkCentre C226 User Guide