Xerox WorkCentre C226 manual Look at the Operation Panel

A Look at the Operation Panel

A Look at the Operation Panel

1 2 3 4 5

/

6

7 8 9

1 Touch panel • Messages and keys appear on the touch panel. Key input is accomplished by touching the keys.

•When a key in the touch panel is touched, a beep sounds and the key is high- lighted.

•Keys that cannot be selected in a screen are greyed out. If touched, a double- beep will sound to alert you that the key cannot be selected.

2Mode select Use these keys to change modes. (See step 1 on page 5-19.) keys

3Numeric keys Use to enter fax numbers, sub-addresses, passcodes, and numerical settings (see page 5-49.)

4[C] Clear Use to clear a mistake when entering fax numbers, sub-addresses, passcodes, and numerical settings. One digit is cleared each time you press the key.

When an original is being scanned, this key can also be used to cancel scanning.

5[COLOR COPY Not used when using the machine as a fax machine. (For information on this key, see

START] page 1-9.)

6[IMAGE SEND] Press to switch to fax mode. The initial screen of fax mode will appear.

When the network scanner option is installed, touch this key to return to the initial screen of fax mode or scanner mode, whichever mode was selected last. (Pressing the [IMAGE SEND] key in a copy screen or printer screen returns you to the initial screen of fax mode.) To switch to the initial screen of fax mode from the initial screen of scanner mode, touch the [SCANNER/FAX] key (see page 5-7).

7 [ ] This is used to produce tone signals when you are on a pulse dial line.

Xerox WorkCentre C226 User Guide 5-5