Xerox WorkCentre C226 manual Problem Check Solution or cause

General Information

Problem	Check	Solution or cause
	Is paper other than Xerox-recommended	Use Xerox-recommended paper.
	paper being used?
		Do not use curled or crimped paper. If
	Paper curled or damp?	you do not use paper for a long time,
		store paper in the wrapper in a dry loca-
		tion.
	Is the paper curled and does it frequently	Paper may be curled when output
	misfeed in the Duplex Module/2-Tray Unit	depending on the paper type and quality.
	or Saddle Stitch Finisher?	In some cases turning the paper over in
Paper misfeeds		the tray will reduce misfeeding due to
		curling.
frequently.
	Multiple sheets of paper fed simulta-
	neously?

		Remove the paper from the paper tray or
		the Bypass Tray, fan the paper as shown
		in the illustration, and then load it again.
	Is paper other than Xerox-recommended	Use Xerox-recommended paper.
	paper being used?
	Is paper size or weight out of the allow-	Use paper in the allowable range.
	able range?
		Moving the pressure adjusting levers of
Printed paper is	Do wrinkles appear when printing enve-	the fusing unit from the normal position to
	lopes?	a weaker pressure position may help alle-
wrinkled or the
		viate this problem. (page 1-27)
image rubs off
easily.	Is the pressure adjustment lever of the	Return the pressure adjusting levers of
	fusing unit out of position?	the fusing unit to the normal position.
		(page 1-28)
		Be sure to store paper in the wrapper in a
	Paper damp?	dry location and do not store paper in a
		location that is humid at a high tempera-
		ture or an extremely low temperature.
The contrast on		Adjust the contrast using "DISPLAY
the touch panel is	Is LCD contrast properly adjusted?	CONTRAST" of custom settings.
too high or too low.		(page 1-37)

1-58 Xerox WorkCentre C226 User Guide