Xerox WorkCentre C226 Storing, Deleting, and Using Original Sizes, To 297 mm can be entered in Y

Storing, Deleting, and Using Original Sizes

4. Touch the original size key ( ) that you wish to store or delete.

X68 Y78

To store an original size, touch a key that does not show

a size ( ).

Keys that already have an original size stored will show

the stored size ( X68 Y78 ).

Recall Store/Delete

To delete or change a stored size, touch the key that shows the size that you wish to delete or change.

•If you are storing an original size, go to step 5.

•To delete or change an original size, go to step 7.

5.Enter the X (width) and Y (length) dimensions of the original with the keys.

								X (width) is initially selected.
X
					Cancel		OK
A
			Y					Enter X and then touch the ( ) key to enter Y. A width
								of 64 to 432 mm can be entered in X, and a length of 64
	X			420	mm(64 432)
								to 297 mm can be entered in Y.
					mm(64 297)
	Y			297
		Recall				Store/Delete

6.Touch the [OK] key.

The original size entered in step 5 is stored in the key selected in step 4. To exit, touch the [OK] key.

7.When you touch a key that shows an original size in step 4, a message screen appears that contains the keys [CANCEL], [DELETE], and [STORE].

•To cancel the procedure, touch the [CANCEL] key.

•To delete the selected original size, touch the [DELETE] key.

•To change the original size stored in the key, touch the [STORE] key. The screen of step 5 will appear to let you change the size.

8.To exit, touch the [OK] key.

Xerox WorkCentre C226 User Guide 2-11