Xerox WorkCentre C226 manual Use the numeric keys to enter the fax number, Passcode max digits

Fax Unit

9. Use the numeric keys to enter the fax number.

Direct Address / Individual		Next		Exit
		Cancel		Ok
Fax No.
Enter The Fax No. Via The 10-Key Pad, Then Press [Ok].
			Pause
	0666211221

Sub Address

To insert a pause between digits of the number, touch the [PAUSE] key. The pause appears as a hyphen "-". Refer to “Pause time setting” in the “Fax Unit” section of the WorkCentre C226 System Administration Guide to set the duration of the pause.

If you make a mistake, press the [C] key to clear one digit at a time, and then enter the correct digit(s).

If you are not going to enter a sub-address and passcode after the fax number, pro- ceed to step 12.

NOTES: • For information on sub-addresses and passcodes, see “Transmission Between Machines Supporting F-codes” on page 5-49.

•A maximum of 64 digits can be entered, including the fax number, sub-address, passcode, any pauses (hyphens), and slashes "/" (to separate the sub-address and passcode).

10.If you need to enter a sub-address, touch the [SUB ADDRESS] key and then enter the sub-address with the numeric keys.

Cancel Ok

Press [Ok].

Pause

Sub Address

When you touch the [SUB ADDRESS] key, a slash is entered after the fax number. Continue by entering the sub-address (max. 20 digits).

If you do not wish to enter a passcode, proceed to step 12.

11.If you wish to enter a passcode, touch the [SUB ADDRESS] key once again and enter the passcode with the numeric keys.

When you touch the [SUB ADDRESS] key, a slash is entered after the sub-address. Continue by entering the

o. Via The 10-Key Pad, Then Press [Ok

passcode (max. 20 digits).

0666211221/3456/

5-70 Xerox WorkCentre C226 User Guide