Xerox WorkCentre C226 manual Touch the Data Store key

Transmission and Reception Using the Polling Function

4. Touch the [DATA STORE] key.

Pollin

Data Store Print

5. Touch the [PUBLIC BOX] key.

This specifies that the document will be scanned into the

Public Box.

Public Box

6.Set the original size, resolution, exposure and other scanning conditions as needed. (See “Manually Setting the Scanning Size” on page 5-13.)

7.Press the [BLACK COPY START] key.

The document is scanned. If other document data has previously been stored, the new data will be added on after the old data.

If you used the document glass and have another page to scan, change the pages and then press the [BLACK COPY START] key again. Repeat this procedure until all pages have been scanned, and then touch the [READ-END] key that appears in the message screen. When the document data has been stored in the Public Box, "JOB STORED." appears on the screen, after which you will return to the initial screen.

NOTE: To cancel scanning

To cancel scanning of a document while scanning is in progress, press the [C] key. To delete a document that has already been scanned, see “Deleting document data from the Public Box” on page 5-41.

NOTE: The machine has been initially set to automatically clear document data from the Public Box after polling takes place and the data is sent to the polling machine. You can use the key operator program to change this setting so that the data is not automatically cleared and polling can take place repeatedly.

Xerox WorkCentre C226 User Guide 5-39