Xerox WorkCentre C226 manual Recalling a job program, Make all copier selections to be stored

Copier Operation

4. Make all copier selections to be stored.

To Store, Make Selections And Press [OK], To Delete, Press [Cancel].

Special Modes

The number of copies cannot be stored.

	Pla
2-Sided Copy	B
	A4
Output	Duplex
	A4
	A3

5. Touch the [OK] key.

And Press		Cancel	OK
ncel].
			Auto
		Original
	Plain		Auto
		Exposure
	B5
		Auto	A4
A4		Paper Select

Duplex

A4	100%
A3
	Copy Ratio

The selected settings will be stored under the register number selected in step 3.

If a number key is selected in step 3 that has already been programmed.

A setting confirmation screen will appear. To replace the existing program with the new program, touch the [STORE] key and continue from step 4. If you do not wish to replace the existing program, touch the [CANCEL] key to return to the screen of step 3 and select a different number key.

NOTE: If overwriting of programmed copy settings has been prohibited in the key operator programs, you will not be able to store a job program.

Recalling a job program

1. Press the [#/P] key.

2. Touch the desired storage register number key to recall the job from memory.

Job Programs

Press Program Number.

When a number key is touched, the selection screen will be closed and the stored job program will be recalled. A number for which no job program has been stored can- not be selected.

Recall

2-74 Xerox WorkCentre C226 User Guide