Xerox WorkCentre C226 manual Procedure for F-Code Polling

Fax Unit

Checking and clearing document data in a memory box

The procedure for checking document data in an F-code polling memory box by print- ing it and the procedure for clearing data from a box are almost the same as the proce- dures for printing and clearing document data from the Public Box.

Instead of touching the [PUBLIC BOX] key in step 3 of “Printing document data in the Public Box” on page 5-40 or “Deleting document data from the Public Box” on page 5- 41, touch the key of the desired memory box.

If a document icon ( ) appears to the right of a mem- ory box key, document data has been stored in that box and you can print it out.

However, the contents cannot be printed or deleted while the memory box is being used for transmission.

ta

Marketing Group

Xerox Branch Ex

Public

Procedure for F-Code Polling

Make sure that a document has not been loaded in the DADF tray or on the document glass, and then follow the steps below.

NOTES: • You must know the sub-address (SEP) and passcode (PWD) of the other machine's F-code polling memory box.

•Serial polling (selecting multiple fax machines to be polled using a group key or by touching the [NEXT ADDRESS] key) is not possible with F-code polling.

1. In fax mode, touch the [SPECIAL MODES] key and then the [POLLING] key.

Special Modes Address Review

Polling

Dual Page

If the address directory screen appears, touch the [CON- DITION SETTINGS] key to display the condition settings screen.

The [POLLING] key is highlighted and the polling icon appears.

Scan

Program

To cancel polling, touch the [POLLING] key once again

so that it is not highlighted.

2. Touch the [OK] key.

aker Redial

You will return to the initial screen.

Ok

5-54 Xerox WorkCentre C226 User Guide