Xerox WorkCentre C226 Before Using the FAX Feature, Make sure the fax power switch is turned on

Points to Check and Program After Installation

•Use caution when installing or modifying telephone lines.

•Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

•Do not use a telephone to report a gas leak in the vicinity of the leak.

•Do not install or use the machine near water, or when you are wet. Take care not to spill any liquids on the machine.

Before Using the FAX Feature

This section contains basic information about using the fax features of this product. Please read this section before using the fax features.

Points to Check and Program After Installation

After installing the unit and before using it as a fax machine, check the following points and program the required information.

Make sure the fax power switch is turned on

In addition to the machine power switch, the machine also has a fax power switch (see page 5-2).When using the machine, be sure to keep the fax power switch turned on at all times.

Make sure the correct date and time have been set

Make sure the correct date and time have been programmed in the unit. If the date and time are wrong, please correct them (see page 1-39).

It is important to set the correct date and time because they are used for such features as Timer Transmission (page 5-32).

Program the sender's name and sender's number

The name and fax number of the user of the machine is programmed in “Own number and name set” in the “Fax Unit” section of the Xerox WorkCentre C226 System Admin- istration Guide.

The programmed name and number are printed at the top of each transmitted fax page. The sender's number is also used as an identification number when you use the Polling function to request transmission from another fax machine (See “Using the Polling Function” on page 5-36.)

NOTE: You can check your programmed name and number by printing out the Sender List.

Xerox WorkCentre C226 User Guide 5-3