Xerox WorkCentre C226 manual Acceptable originals, Dadf

DADF

Copy quantity Displays the selected number of copies before the [START] key is pressed or the num- display ber of remaining copies after the [START] key is pressed. A single copy can be made

when "0" displayed.

Copy Ratio Use to select the copy ratio (page 2-30). display

Exposure tab Touch to adjust the copy exposure (page 2-25).

Paper Select Use to select the paper size (page 2-14,2-22).The display shows the location of the display paper trays, the size of the paper in the trays and the approximate amount of paper

loaded in each tray. The approximate amount of paper in a tray is indicated by .

Original tab Touch this tab to manually enter the original size (page 2-8).

2-Sided Copy Use to select the duplex copy mode setting (pages 2-19,2-24).display

Special Modes Touch to display the Special Modes screen (page 2-37).tab

Output display Use to select sort, group, and staple sort, (pages 2-14, 2-23).

NOTE: For a description of the Operation Panel, see page 1-14.

DADF

The DADF can be used to automatically feed originals for continuous copying. Both sides of two-sided sheet originals can be scanned without having to manually turn the originals over. This feature is convenient for making copies of a large number of origi- nals.

Acceptable originals

When the DADF is used, up to 40 originals of the same size can be set in the feeder (maximum stack thickness of 4 mm (11/64"), or 30 originals of weight 90 g/m2 (24 lbs.)).

Xerox WorkCentre C226 User Guide 2-3