Xerox WorkCentre C226 manual Quick On-line, Storing transmission jobs memory transmission

Fax Unit

Standard

Resolution

Auto A4

Original

A two-sided original icon appears next to the [ORIGI- NAL] key.

Example:

The icon that appears when the [2-SIDED BOOKLET] key is touched.

6. Continue from step 4 of “Basic Procedure for Sending Faxes” (page 5-20).

NOTES: • Booklets and tablets

• Two-sided originals that are bound at the	Booklet	Tablet
side are booklets, and two-sided originals
that are bound at the top are tablets.
• Two-sided scanning turns off after the
document is stored in memory. Pressing the
[CLEAR ALL] key will also cancel two-sided
scanning.

Quick On-line

When you use the DADF to send a multi-page document and there are no previously stored jobs waiting or in progress (and the line is not being used), the machine dials the destination after the first page is scanned and begins transmitting scanned pages while the remaining pages are being scanned. This transmission method is called Quick On-line. The messages "SCANNING ORIGINAL." and "SENDING." both appear until scanning of the final page is completed.

If the receiving party is busy, the transmission will switch to a memory transmission. (Refer to the following section, “Storing transmission jobs (memory transmission)”.)

NOTE: The machine is initially set (factory setting) to perform Quick On-line transmission. If desired, you can turn off this function with the key operator program.

When a document is transmitted using the following methods, the job will be stored in memory (Quick On-line transmission will not be performed):

•Sending from the document glass l broadcast transmission (page 5-30)

•Timer transmission (page 5-32)

•F-code transmission (page 5-49)

Storing transmission jobs (memory transmission)

When a document is sent from the document glass, or when the telephone line is in use, the document is scanned into memory and then automatically transmitted after previously stored transmission jobs are completed. (This is called memory transmis- sion.) This means that transmission jobs can be stored in memory by performing a transmission operation while the machine is occupied with another transmission/ reception operation. This is called storing transmission, and up to 50 jobs can be stored in memory at once. After transmission, the scanned document data is cleared from memory.

5-24 Xerox WorkCentre C226 User Guide