Xerox WorkCentre C226 manual Ready To Copy Please See Your Key Operator For Assistance

General Information

7. Enter your account number (5 digits) with the numeric keys.

As you enter your account number, the hyphens ( ) change to asterisks (). If you enter an incorrect digit, press the key and re-enter the correct digit.

When a correct account number is entered, the following message will appear.

Account Status:Copies Made/Remaining

B/W

S.Colour

F.Colour

This does not appear if the account counter has only been set for colour copy mode.

If a limit has been set by key operator program for the number of copies that can be made by the account, the remaining number that can be made is displayed.

This message appears for several seconds and then changes to the following message.

Ready To Copy.

NOTE: If "Account number security" is turned on in the key operator programs, the following message will appear in the event that an incorrect account number is entered three times in a row.

Please See Your Key Operator For

Assistance.

While this message appears (for about one minute), no other operations can be performed.

8.Follow the appropriate steps to perform the copy job. When copying is begun, the following message will appear.

Ready To Copy.

Press [Acc.#] When Finished.

In the case of interrupt copying (page 2-77),the following message will appear.

Ready To Copy. When Interrupt Copying

Is Finished Press [Cancel].

9. When the copy job is finished, press the [] key ([ACC.#-C] key)

1-20 Xerox WorkCentre C226 User Guide