Xerox WorkCentre C226 manual Touch the Margin Shift key on the Special Modes screen

Copier Operation

1. Touch the [MARGIN SHIFT] key on the SPECIAL MODES screen.

Margin Shift

Centring

The margin shift setting screen will appear.

The margin shift icon ( ) will also appear in the upper left of the screen to indicate that the function is turned on.

2. Select the shift direction.

		Touch a shift direction key to select right or left. The
		selected key will be highlighted.
Right	Left

3. Set the shift amount as needed and touch the lower [OK] key.

					OK
			Cancel		OK
Side 1				Side 2
	10	mm(0 20)			10	mm(0

Use the and the keys to set the shift amount. The shift amount can be set from 0 to 20 mm in 1 mm incre- ments.

If a Duplex Module/2-Tray Unit and Duplex Bypass/ Inverter Unit are not installed, the margin shift setting for back-side copies will not be displayed.

4.Touch the [OK] key on the SPECIAL MODES screen. Return to the main screen of copy mode.

About the steps that follow

If a DADF is being used, see pages 2-13through 2-19.If the document glass is being used, see pages 2-21through 2-24.

To cancel the margin shift function, touch the [CANCEL] key on the margin shift setting screen. This must be done before you touch [OK] in step 4.

2-40 Xerox WorkCentre C226 User Guide