Xerox WorkCentre C226 manual Copying from the document glass

Normal Copying

4.The image to be copied onto the second side of 2-sided copies can be inverted so that the resultant 2-sided copies are in the correct orientation for binding at the top. For top binding, touch the [BINDING CHANGE] key on the 2-sided copy selection screen.

5.Touch the [OK] key.

OK

Binding

Change

Make selections and proceed as in steps 3 to 6 on pages 2-14and 2-15.

Copying from the document glass

When copying originals which cannot be fed from the DADF such as thick originals, open the document cover and copy the originals from the document glass.

NOTE: Certain restrictions exist depending on the amount of memory installed and the copy settings. (See “Copy mode output restrictions” on page 2-16and “Guidelines for the number of scannable originals during sort copying” on page 2-17.)

1-sided copies of 1-sided originals

OriginalCopy

1. Set an original on the document glass (pages 2-4 to 2-10).

Original size detector

NOTE: Do not place any objects under the original size detector, because they may damage it or the original size may not be detected properly.

Xerox WorkCentre C226 User Guide 2-21