Xerox WorkCentre C226 manual Colour balance

Colour Adjustments Menu

4.Touch the [OK] key on the COLOUR ADJUSTMENTS menu screen. Return to the SPECIAL MODES screen.

5.Touch the [OK] key on the SPECIAL MODES screen. Return to the main screen of copy mode.

About the steps that follow

If a DADF is being used, see pages 2-13through 2-19.If the document glass is being used, see pages 2-21through 2-24.

In either case, press the [COLOUR COPY START] key to begin copying.

To cancel the SUPPRESS BACKGROUND function, select the SUPPRESS BACK- GROUND function again and touch the [CANCEL] key (step 2).

Colour balance

This function is used to adjust the colour, tone, and density of colour copies.

1.Touch the [COLOUR BALANCE] key on the COLOUR ADJUSTMENTS menu screen.

The COLOUR BALANCE setting screen will appear.

RGB Adjust Sh

Colour

Bri

Balance

2.Use the keys indicated in the illustration below to adjust the colour balance settings.

(B)(B)

Colour

Adjustments

Colour Balance												Cancel
			+	1	2	3	4	5	6	7	8	+	ALL
	Y	M
			0									0
	C	Bk	-									-

OK

OK

(A) (C) (D)

The Colour Balance setting allows you to adjust the densities of four colours: cyan, magenta, yellow, and black.

The density range is divided into eight levels for each colour, from 1 (lowest density areas) to 8 (highest density areas). The density can be adjusted one level at a time or eight levels at once.

Xerox WorkCentre C226 User Guide 2-55