Xerox WorkCentre C226 More information on plain paper, Paper in AB system Paper in inch system

General Information

More information on plain paper

The following restrictions apply to plain paper. Be sure to load the paper correctly.

Incorrect loading may result in skewed feeding or misfeeds.

		Paper in AB system	Paper in inch system
		A6R - A3W*	5-1/2"x8-1/2" - 12"x18"*
	Xerox standard paper	80g/m2	21 lbs.
Plain
	Restrictions on paper
paper
	other than Xerox stan-	64 to 105g/m2 or 17 to 28 lbs.
	dard paper

Recycled, coloured, pre-punched, pre-printed and letterhead papers must conform to the same conditions as above.

*In the High Capacity Feeder, only A4 size paper can be used when using AB sizes, and only 8-1/2" x 11" can be used when using inch sizes.

More information on special media that can be used

The following restrictions apply to special media. The use of incorrect media may result in fusing problems (weak adhesion of toner to paper or toner smudging when rubbed), skewed feeding, misfeeds, or other failures.

		Type	Remarks
			For paper sizes from A6R to A3W (5-1/2" x 8-1/2" to 12" x 18"),
			paper weights from 106 to 200 g/m2 (28 to 54 lbs.) can be used.
	Heavy	heavy paper 1	Postcards can be used.
			Do not use folded postcards, picture postcards, or postcards with a
	paper		coated front. These may cause misfeeds or a dirty printed image.
Special
		heavy paper 2	For paper sizes from A6R to A3W (5-1/2" x 8-1/2" to 12" x 18"),
paper			paper weights from 201 to 300 g/m2 (54 to 80 lbs.) can be used.
	Transparency film		Use Xerox recommended transparencies.
			Applicable standard envelopes: COM-10, Monarch, DL, C5
	Envelopes		Envelopes can only be fed from the Bypass Tray. Applicable paper
			stock weight for envelopes is 75 to 90 g/m2 or 20 to 23 lbs.

•Special paper such as heavy paper 2, transparency film, and envelopes cannot be output to the centre tray.

•Paper that cannot be output to the centre tray is output face-up to the left tray.

1-32 Xerox WorkCentre C226 User Guide