Xerox WorkCentre C226 manual About the steps that follow

Copier Operation

A suitable orientation for placement of the original and the number of sheets of paper required for the enlarged image are displayed based on the selected original size and enlargement size.

NOTES: • The paper size, number of sheets required for the enlarged image, and the ratio are automatically selected based on the selected original size and enlargement size. (The paper size and ratio cannot be selected by the operator.)

•The relations between the original size and enlargement size selected by the operator and the automatically selected paper size, number of sheets, and ratio are shown on page 2-68.

•If no paper trays have the size of paper that was automatically selected, "Load XXX paper" will appear. Change the paper in one of the trays or the Bypass Tray to the indicated size of paper.

5.Place the original on the document glass in accordance with the indicated orientation. (page 2-4)

Multi-page enlargement is only possible using the docu- ment glass.

6.The DADF cannot be used for this function.

7.Touch the [OK] key (inside [OK] key) on the MULTI-PAGE ENLARGEMENT setting screen.

Return to the IMAGE EDIT menu screen.

8.Touch the [OK] key on the IMAGE EDIT menu screen. Return to the SPECIAL MODES screen.

9.Touch the [OK] key on the SPECIAL MODES screen. Return to the main screen of copy mode.

About the steps that follow

See page 2-21.

NOTE: Be sure to place the original on the document glass. The DADF cannot be used for this function.

To cancel the MULTI-PAGE ENLARGEMENT function, select the MULTI-PAGE ENLARGEMENT function again and touch the [CANCEL] key (step 4).

2-70 Xerox WorkCentre C226 User Guide