Xerox WorkCentre C226 manual Erase, Screen to indicate that the function is turned on

Special Modes

Erase

The erase function is used to erase the shadow lines on copies produced when copy- ing thick originals or books. The erase modes that can be selected are shown below. The erase width is approximately 10 mm (1/2") in it's initial setting.

Original Copy

EDGE ERASE

Eliminates shadow lines around the edges of copies caused when heavy paper or a book is used as an original.

CENTRE ERASE

Eliminates shadow lines produced by the bindings of bound documents.

EDGE + CENTRE ERASE

Eliminates shadow lines around the edges of copies and eliminates the shadow at the centre of copies.

1.Touch the [ERASE] key on the SPECIAL MODES screen. The erase setting screen will appear.

	The erase icon ( ) will also appear in the upper left of
Erase
	the screen to indicate that the function is turned on.
Covers

Xerox WorkCentre C226 User Guide 2-41