Xerox WorkCentre C226 manual Selecting the File Format, Touch the desired resolution key

Network Scanner Operation

2. Touch the desired resolution key.

	Auto		B/W	Colour	OK
Exposure
		Lowest	150x150dpi	100x100dpi
		Lower	200x200dpi	150x150dpi
Resolution
			300x300dpi	200x200dpi
		Standard
Programmed
File Format			400x400dpi	300x300dpi
		Higher
Auto
		Highest	600x600dpi	600x600dpi
Original

Five selections are available for the resolution. Touch the desired resolution key under black and white or colour, depending on the original to be scanned.

The selected key is highlighted.

NOTE: To use colour 600 x 600 dpi, one 256-MB and one 128-MB memory module (or two 256-MB memory modules) must be added to the printer controller, and one 128-MB or 256-MB memory module must be added for image memory. For more information, see page 4-1.

3. Touch the [OK] key.

Colour OK

pi 100x100dpi

pi 150x150dpi

pi 200x200dpi

pi 300x300dpi

You will return to the initial screen.

NOTES: • The initial factory resolution setting is LOWER. If desired, you can change the initial setting to a different setting using the key operator program, “Initial resolution setting” (page 4-66.

•The resolution setting cannot be changed once scanning has begun.

Selecting the File Format

When you send an image to one or more recipients using Scan to E-mail or Scan to FTP, the [FILE FORMAT] key enables you to temporarily override the individual file for- mat settings (FILE TYPE / COMPRESSION MODE) stored for each recipient and send the image to all of the recipients using a single file format setting.

"PROGRAMMED" is initially selected, which means that the file format settings stored for each recipient are used.

4-38 Xerox WorkCentre C226 User Guide