Xerox WorkCentre C226 Checking the Size of a Loaded Original, Original key. Check the key to make

Fax Unit

NOTE: Do not place any objects under the original size detector plate. Closing the document glass cover with an object underneath may damage the original size detector plate and prevent correct detection of the document size.

Regardless of the size of the original, place the original on the left side of the docu- ment glass. (Align the original with the document glass scale and centering mark.)

Place the original in the appropriate position for its size as shown below.

Document glass scale mark

A4	A3
B5	B4
A5

Document glass scale mark

B5 R	A4 R
A5 R

Checking the Size of a Loaded Original

When a standard-size* original is placed, the origi- nal size is automatically detected (automatic origi-

nal detection function) and displayed in the top half

Standard

of the [ORIGINAL] key. Check the key to make

Resolution

sure that the original size has been correctly

AUTO A4

detected. Original

1 : [AUTO] appears when the automatic original detection function is operating.

2: Displays the original size.

If a non-standard size original is placed or if you wish to change the scanning size, fol- low the steps below to manually set the original scanning size

NOTE: * Standard sizes that can be detected are as follows:

A5, B5, B5R, A4, A4R, B4, A3, 5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, 8-1/2"x14", 11"x17". If a non-standard size original is loaded (including special sizes), the closest standard size may be displayed, or the original size may not appear at all.

5-12 Xerox WorkCentre C226 User Guide