Xerox WorkCentre C226 manual 64%

Copier Operation

5.Use the reduction, enlargement, and ZOOM ([], []) keys to change the copy ratio in the horizontal (X) direction.

							A
									Y
			64%
									Zoom
			50%
						Zoom
%									1
				X	50			%
		A
				Y	100
%								%		2
				Zoom
%											4
	XY Zoom						Cancel

A fixed ratio key will not become highlighted when touched.

When the DADF is used, the ratio can only be set within the range 50% to 200%.

The zoom keys can be used to change the ratio from 50% to 200% in increments of 1%.

Touch the [] key to increase the ratio, or the [] key to decrease the ratio. If you continue to touch either key for 3 seconds, the ratio begins to change quickly.

NOTE: Touch a reduction key or an enlargement key to set the approximate ratio, then touch the [] key to decrease the ratio or [] key to increase the ratio.

6. Touch the [Y] key.

%
		X	50
	A
		Y	100
%

%

%1

%2

4

XY ZOOM CANCEL

7.Use the reduction, enlargement, and ZOOM ([], []) keys to change the copy ratio in the vertical (Y) direction as you did for (X) in step 5.

% X 50 %

70%
				A
		X
			%		Y	70		%	2
	A
		Y
64%					Zoom
			%				4
		Zoom
50%
			XY Zoom				Cancel

Either copy ratio can be changed for fine-tuning until the next step is performed.

2-34 Xerox WorkCentre C226 User Guide