Xerox WorkCentre C226 manual Using the Polling Function

Fax Unit

Using the Polling Function

A document should not be loaded in the machine when the following operation is per- formed. When used in conjunction with the timer transmission function, only one poll- ing job can be stored.

NOTE: If the other machine has a polling security function (see “Restricting polling access (polling security)” on page 5-42), use the key operator program to program your own fax number, and ask the operator of the other machine to appropriately program your fax number in that machine.

1. In fax mode, touch the [SPECIAL MODES] key and then touch the [POLLING] key.

If the address directory screen appears, touch the [CON- Special Modes Address Review DITION SETTINGS] key to display the condition settings

screen.

Polling

Dual Page

The [POLLING] key is highlighted and the polling icon appears.

Scan

Program

To cancel polling, touch the [POLLING] key once again so that it is not highlighted.

2. Touch the [OK] key.

You will return to the initial screen.

aker Redial

Ok

ber

3.Dial the number of the other fax machine or touch an auto-dial key (one-touch or group key).

Corpo.Tps

Xerox Group

If the condition settings screen appears, touch the [ADDRESS DIRECTORY] key to display the address

Spe

directory screen.

If you are performing serial polling, touch the [NEXT ADDRESS] key and repeat this step.

NOTE: When performing serial polling, an auto-dial key that includes a sub-address or passcode (page 5-49)cannot be selected.

5-36 Xerox WorkCentre C226 User Guide