Xerox WorkCentre C226 manual Programming Frequently Used Operations, Selecting Dual Page Scan

Fax Unit

Selecting Dual Page Scan

Follow the steps below and then send the fax.

1.In fax mode, touch the [SPECIAL MODES] key and then touch the [DUAL PAGE SCAN] key.

Special Modes Address Review

Polling

Dual Page

If the address directory screen appears, touch the [CON- DITION SETTINGS] key to display the condition settings screen.

Scan

Program

2. Touch the [OK] key.

You will return to the initial screen.

aker Redial

Ok

ber

3. Place the original on the document glass, and perform the transmission operation.

If you have more originals to scan after pressing the [BLACK COPY START] key and scanning the first original, change originals and repeat scanning until all originals have been scanned. When finished, touch the [READ-END] key that appears in the message display.

NOTE: To cancel Dual Page Scan:

Press the [CLEAR ALL] key.

Programming Frequently Used Operations

This function allows you to store the steps of an operation, including the destination and scanning settings, into a program. This function is convenient when you frequently send documents, such as a daily report, to the same destination. Up to eight programs can be stored.

Programs can be stored using the custom settings, and a name up to 18 characters long can be assigned.

For information on storing, editing, and deleting programs, refer to “Storing a Program” on page 5-78,and “Editing and Deleting Programs” on page 5-80.

5-44 Xerox WorkCentre C226 User Guide