Xerox WorkCentre C226 manual About the settings, Total count

General Information

The procedure for setting the clock is shown below as an example.

Custom Settings
Clock Adjust	OK

Year	Month	DayAY	HOURour	Minute
2004	11	01	00		00

Date Format

Daylight Saving Time Setting

3.Touch the year, month, day, hour or minute key, and then use the or key to adjust the setting.

•If you select a non-existent date (for example, Feb. 30), the [OK] key will grey out to prevent entry of the date.

•Select [DAYLIGHT SAVING TIME SETTING] checkbox to have the time auto- matically change at the beginning and end of daylight saving time.

4.Touch the [OK] key.

5.To finish the setting operation, touch the [EXIT] key.

Custom Settings
					Exit
		Display	List Print
	Total Count			Clock
		Contrast
	Tray Settings	Address	Receive Mode	Fax Data
		Control		Forward

Keyboard

Select

Key Operator Programs

About the settings

Total count

This displays the following sheet counts:

The number of sheets printed in copy, print, and fax modes.

The number of sheets transmitted using the fax function and scanned using the network scanner function.

The number of sheets used by optional equipment such as the DADF and the Duplex Module of the Duplex Module/2-Tray Unit, and the number of sheets stapled by the Saddle Stitch Finisher.

In the case of only:

•Each sheet of paper that is A3 (11" x 17") size or larger is counted as two sheets.

•Each sheet of paper used for automatic two-sided copying is counted as two sheets (A3 (11" x 17") paper is counted as four sheets). (When an optional Duplex Module/2-Tray Unit and a Duplex Bypass/Inverter Unit are installed.)

1-40 Xerox WorkCentre C226 User Guide