Xerox WorkCentre C226 manual Programming an F-Code Memory Box

Fax Unit

Programming an F-Code Memory Box

A box name, sub-address/passcode, and function must be programmed in a memory box.

NOTES: • When programming a new memory box, a sub-address that is being used for another box cannot be used. The passcode, however, can be the same as a passcode used in another box.

•A passcode can be omitted.

•Up to 50 F-code memory boxes can be programmed. If 50 F-code memory boxes have already been programmed, a warning message will appear and you will not be able to program a new box. First delete an unused F-code memory box (page 5-88)and then program the new box.

1.Press the [CUSTOM SETTINGS] key and then touch the [ADDRESS CONTROL] key (refer to steps 1 and 2 on page 5-67).

2.Touch the [F-CODE MEMORY BOX] key.

Custom Index

F-Code Memory Box

3.Touch one of the memory box keys ([POLLING MEMORY], [CONFIDENTIAL], or [RELAY BROADCAST] ) on the store (upper) line.

Custom Settings
F-Code Memory Box					Ok
				Relay
	Store	Polling Memory	Confidential
				Broadcast

Amend/Delete Polling Memory Confidential

Relay

Broadcast

([POLLING MEMORY] is touched in the example here.)

The F-code memory box programming screen appears.

4. Touch the [BOX NAME] key.

F-Code Memory Box / Polling Memory

No.001

Box Name

Sub Address

POLLING TIMES

The "No." that automatically appears is the lowest num- ber from 001 to 050 that has not yet been programmed. When the [BOX NAME] key is touched, the letter-entry screen appears. Enter up to 18 characters for the name.

Refer to page 5-90for the procedure for entering letters.

5-82 Xerox WorkCentre C226 User Guide