Xerox WorkCentre C226 manual Condition setting screen

Protecting Information Programmed in the Web Page ("Passwords")

*1 When the optional Fax Unit is installed, you will return to the condition setting screen of fax mode or scan/fax mode, depending on which mode was last selected. If the condition setting screen of fax mode appears, touch the key to switch to the base screen of scan/fax mode.

NOTE: For information on the parts of the unit and the operation panel that are used for network scanning, refer to pages 1-13and 1-14.For parts that are used for both network scanning and printing, refer to page 3-40.

Condition setting screen

The display is initially set (factory setting) to show the following condition setting screen as the initial screen.

	Ready To Send.
		Auto
Exposure						Address
						Directory
	Lower
Resolution			E-Mail Address		Sender List
Programmed
				Address Review
File Format
	Auto		Scanner			Fax
Original

Message Messages appear here to indicate the current status of the machine. display

[ADDRESS This displays the Address Directory screen (page 4-21).Touch this key when you wish DIRECTORY] key to use a one-touch key that has a destination (or group) programmed in it (page 4-25).

[SENDER LIST] Touch this key to select the sender when sending an image (page 4-24).key

[ADDRESS When performing Scan to E-mail broadcast transmission, touch this key to check your REVIEW] key selected destinations. Your selected destinations will appear as a list, and the list can

be edited (page 4-30.

Xerox WorkCentre C226 User Guide 4-19