Xerox WorkCentre C226 manual Address directory screen alphabetically ordered, Settings

Fax Mode (Condition Settings Screen)

Address directory screen (alphabetically ordered)

The screen below appears initially when the address directory is set as the initial screen using “Default display settings” in the “Fax Unit” section of the WorkCentre C226 System Administration Guide.

				2
Ready To Send.				Speaker	Redial
A		B			Condition		3
					Settings
C		D
1					Sub Address
E		F
G		H			Address Review
Frequent Use	ABCD	EFGHI	JKLMN	OPQRST UVWXYZ	ABC	Group
		5				4

1One-touch key This shows the one-touch keys that have been stored on the selected "index card". display The key type is indicated by the icon at the right. One-touch keys in which a fax num-

ber is stored are indicated by a "" icon. The display is initially set to show 8 keys. This can be changed to 6 or 12 using the key operator program.

2Display In cases where the one-touch keys cannot all be displayed on one screen, this shows

switching keys how many screens are left. Touch the keys to move through the screens.

3[CONDITION This displays the condition settings screen, which is used to set various conditions.

SETTINGS]

4[ABC GROUP] Touch this key to switch between the alphabetical index and the group index.

5Index keys One-touch key destinations are stored on each of these index cards (alphabetical index or group index). Touch this key to switch between the indexes.

Group indexes make it possible to store one-touch keys by group with an assigned name for easy reference. This is done with the custom settings (refer to pages 5-68and 5-74).Frequently used one-touch key destinations can be stored on the [FRE- QUENT USE] card for convenient access.

NOTE: The screen shown above is the alphabetical address directory. If desired, the initial screen can be set to the group address directory.

Xerox WorkCentre C226 User Guide 5-9