Xerox WorkCentre C226 manual Smtp Setup Description

Network Scanner Operation

When you have completed all of the entries, click "Submit". The entries will be stored.

Click here.

SMTP Setup

Item	Description
Primary SMTP Server	Enter an IP address for the primary e-mail server or a host name*. (If you will be
	using Scan to E-mail, be sure to enter this information.)
Secondary SMTP Server	Enter an IP address for the secondary e-mail server or a host name. No need to
	enter if a secondary e-mail server is not set up.
Port Number	Enter a Port Number for SMTP.
	The default is 25.
Timeout [seconds]	Enter a time out period, from 0-60 seconds, that the system will wait for as it
	attempts to connect to the primary server. The default is 20 seconds. If no con-
	nection is made, the system will then look for the secondary server if it has been
	set up. If not, the system will stop attempting to connect.
Reply E-mail Address	Enter an e-mail address to which the machine returns an unsuccessful delivery
	message when the distribution has failed. Only 1 e-mail address can be
	entered. The entered e-mail address is also used for the sender e-mail address.
Time Zone	Select the time zone of the place to use this Network Scanning System. A spe-
	cific time zone is set after the selection.
SMTP Authentication	Select this checkbox if an SMTP server that authenticates users during SMTP
	authentication will be used. After selecting the checkbox, the User Name and
	Password text boxes under the checkbox are enabled. Enter the information
	necessary for authentication in these text boxes.

4-8 Xerox WorkCentre C226 User Guide