Mitsubishi SR-HD5 HD DIRECTV Plus Receiver
Page 7-12
TurboTune
Highlighting the TurboTune button on the SETUP
screen and pressing the key on the remote
control displays the TURBO TUNE SETUP screen
shown at the right.
On the left are buttons for Done and Video, which are
explained below.
Done
Highlighting the Done button on the screen and
pressing the key on the remote control causes
an exit from the TURBO TUNE SETUP screen and
a return to the SETUP screen.
Video
Highlighting the Video button on the screen and pressing the key on the remote control
will return you to the last program you were viewing.
The TURBO TUNE SETUP screen is used to specify which nine channels will appear in the
TurboTune pop-up panel that displays when is pressed.

Set Channel

Using the , , , and keys, highlight one of the nine channel boxes. You can enter the desired
channel using the number keys on the remote control or by using the and keys. Pressing
while highlighting one of the channel boxes will also initiate a pop-up panel that will
allow you to set the channel using the and keys on the remote control or the HD receivers
front panel.
Installation
Highlighting the Installation button on the SETUP screen takes you to the INSTALLATION
screen, which contains utilities to facilitate installation of your satellite dish antenna. You can
also evaluate your systems signal strength via the INSTALLATION screen. This screen was
discussed in detail in Chapter 4, Setting Up the Satellite Dish Antenna and Terrestrial Inputs.
VCR Setup
The VCR SETUP screen provides access to the
settings that will allow the HD receiver to
communicate the record and stop commands to your
VCR.

Brand

Using the and keys, search through the various
brands of VCRs that are supported. Related brands
that share the same control codes may be suggested.
You may want to experiment with these if you are
having difficulty finding a functioning code under
your VCRs own brand name.
The TURBOTUNE setup screen
SELECT
SELECT
SELECT
SELECT
SELECT
The VCR SETUP screen