Copier Operation

4. Ensure that A4 (8-1/2" x 11") size paper is selected.

If A4 (8-1/2" x 11") size paper is not selected, touch the appropriate key in the Paper Select display to select A4 (8- 1/2" x 11") size paper.

About the steps that follow

For two-sided copying, follow steps 2 through 4 beginning on page 2-24 and then fol- low steps 4 through 7 beginning on page 2-23.

For one-sided copying, follow steps 4 through 7 beginning on page 2-23.

To cancel the dual page copy function, touch the [DUAL PAGE COPY] key on the spe- cial modes screen (step 1). (The highlighted display will be cancelled.)

NOTE: To erase shadows caused by document binding, use the edge erase function (page 2- 41). (Centre Erase and Edge + Centre Erase cannot be used in combination.)

Centring

When the original and copy paper are of different sizes, CENTRING is used to shift the image to the centre of the copy paper but only in the left to right direction.

[Example]

This function can be used to reduce a larger sized origi-

Original

Copy

nal image and centre it on a copy of smaller paper size,

 

 

as well as centre a smaller original onto a larger sized

 

 

 

 

copy.

This function will not work when non-standard size origi-

nals or copy paper are used. This function cannot be selected when enlargement copying has been selected.

1. Touch the [CENTRING] key on the SPECIAL MODES screen.

 

The [CENTRING] key is highlighted to indicate that the

Margin Shift

function is turned on, and the centring icon ( ) will appear in the upper left of the screen.

Centring

2.Touch the [OK] key on the SPECIAL MODES screen. Return to the main screen of copy mode.

2-44

Xerox WorkCentre C226 User Guide

Page 148
Image 148
Xerox WorkCentre C226 manual Centring, This function can be used to reduce a larger sized origi, Copy