Xerox WorkCentre C226 manual Setting for F-Code Relay Broadcast Memory Boxes Recipient

Fax Unit

3. Use the numeric keys to enter a 4-digit number.

F-Code Memory Box / Confidential		Next	Exit
	No.003
Print Pin		Cancel	Ok
Enter The Print Pin Via The 10-Key Pad,Then Press [Ok].

•If you make a mistake, press the [C] key. All digits will be cleared, so you will need to re-enter the number from the first digit.

•To cancel entry of the print PIN, touch the [CANCEL] key. You will return to the screen of step 2 without programming a print PIN.

4.Touch the [OK] key.

You will return to screen of step 2 and the entered print PIN will appear.

5.To exit, touch the [EXIT] key.

To program another memory box, touch the [NEXT] key.

Next Exit Touching the [EXIT] key returns you to the screen of

step 3 on page 5-82.

Touching the [NEXT] key returns you to the screen for programming a new memory box (the screen of step 4 on page 5-82).

Setting for F-Code Relay Broadcast Memory Boxes (Recipient)

Program the end receiving machines to which document data received in the F-code relay broadcast memory box will be transmitted when your machine is a relay machine.

NOTES: • Up to 30 end receiving machines (30 one-touch keys or group keys) can be programmed. If you attempt to program more than this number, a message will appear and programming will not be possible.

•Only destinations that have been programmed in auto dial keys (one-touch keys or group keys) can be selected. If you need to include a destination that has not been programmed in an auto dial key, first program it in a one-touch key (page 5- 68) and then program the destination as an end receiving machine.

5-86 Xerox WorkCentre C226 User Guide