Xerox WorkCentre C226 manual Tray settings, Receive mode, Fax data forward, Keyboard select

General Information

Tray settings	The paper type, paper size and automatic tray switching can
	be set for each tray. Automatic tray switching allows feeding
	to switch between trays loaded with the same type and size
	of paper. If one tray runs out of paper during printing, printing
	will continue from the other tray. (See page 1-41.)

For the detailed descriptions and use of the settings listed below, see Chapter 5, “Fax Unit” and Chapter 4, “Network Scanner Operation”.*

Address control	Use this to store fax destinations (fax numbers). This is
	also used to store groups, memory boxes, and user
	indexes.
	If the network scanner function is available, e-mail
	addresses, user indexes, and scanner senders can
	also be stored.
Receive mode	Use this to configure fax reception settings (auto/man-
	ual).
Fax data forward	Faxes received to memory can be forwarded to another
	destination.
Keyboard select	When using the fax function or network scanner func-
	tion, you can switch the arrangement of the letter keys
	in the display keyboard used for storing and editing
	destinations in the English character entry screen.

Key operator program These are programs that are used by the key operator (administrator of the machine) to configure machine set- tings. A key appears for these settings in the custom set- tings menu screen. For information on these settings, see “Key Operator Programs” in the WorkCentre C226 System Administration Guide.

*These settings can be configured if the fax function or network scanner function is available.

1-38 Xerox WorkCentre C226 User Guide