Xerox WorkCentre C226 manual Sending an Image, Basic Transmission Method

Basic Transmission Method

Sending an Image

Basic Transmission Method

1. Make sure the machine is in scanner mode.

/

When the [IMAGE SEND] key light is on, the machine is in scanner mode. If the light is not on, press the [IMAGE SEND] key.

When the optional Fax Unit is installed, you will return to the base screen of fax mode or scan/fax mode, depending on which mode was last selected. If the base screen of fax mode appears, touch the

Scanner Fax key (see *1 on page 4-19 to switch

to the base screen of scan/fax mode.

2. Load the original.

For detailed information on loading an original, refer to page 2-4.

NOTE: You cannot load documents in both the DADF and on the document glass and send them in a single transmission.

3. Check the original size.
		Lower	The original size is automatically detected.
	Resolution		If you loaded a non-standard size document or wish to
	Programmed		change the scanning size, touch the [ORIGINAL] key
	File Format
			and set the document size. (Refer to page 4-34.)
	Auto	A4

Original

NOTES: • To scan a two-sided original, refer to page 4-32.

•To rotate the document image 90° before transmission, see page 4-34.

Xerox WorkCentre C226 User Guide 4-23