Xerox WorkCentre C226 manual User Maintenance for copying

User Maintenance (for copying)

2. Open and close the DADF cover.

Opening and closing the cover clears the misfeed dis- play. Copying cannot be resumed until this step is per- formed.

A message may appear indicating the number of originals which must be returned to the DADF tray. Return the originals to the DADF tray and press the [START] key for colour or black and white copying as appropriate for the job being resumed.

User Maintenance (for copying)

To ensure good service from this product over a long period of time, it is recommended that the following maintenance procedures be performed on a regular basis.

CAUTION Do not use flammable spray to clean the machine. If gas from the spray comes in contact with hot electrical components or the fusing unit inside the machine, fire or electrical shock may result.

Wipe with a clean, soft cloth.

If necessary, moisten the cloth with water or a small amount of neutral detergent. When finished, wipe dry with a clean cloth.

NOTE: When cleaning, do not use thinner, benzene, or similar volatile cleaning agents. These may degrade or discolour the housing.

If you find that a dirty image results when a copies are made using the DADF, wipe the original scanning area (the area that contains the long narrow glass shown at left).

Xerox WorkCentre C226 User Guide 2-81