Xerox WorkCentre C226 manual Transmission speed

Storing, Editing, and Deleting Auto Dial Keys and Programs

12. Touch the [OK] key.

You will return to the one-touch key programming screen. "REGISTRATION IS COMPLETED" will appear highlighted to the right of "No.".

NOTE: The "FAX No." line only shows 32 digits, regardless of how many digits actually programmed.

13.Check the key name.

The characters appearing next to the [KEY NAME] key will be displayed in the key. Only the first 18 characters of the name entered in step 1 will be displayed. If you need to change the name that will be displayed in the key, touch the [KEY NAME] key.

Registration Is Completed.

Name	Xerox Corporation
Index	User 3	Fax No.
Key Name	Xerox Corporation

If you do not wish to change the name, this step is not necessary.

Refer to page 5-90for the procedure for entering charac- ters.

14.Check the transmission settings.

The initial transmission settings are "TRANSMISSION SPEED: 33.6 kbps" and

"INTERNATIONAL CORRESPONDENCE MODE: NONE". To change either of the settings, touch the [MODE] key.

ration					Initial
	FAX No.		0666211221/3456/987654
		Mode		33.6 kbps/None

If you do not wish to change the settings, this step is not necessary.

After touching the [MODE] key, you can change either of the two settings. When finished, touch the [OK] key.

ration

Transmission speed

Speed selections are 33.6 kbps, 14.4 kbps, 9.6 kbps, and 4.8 kbps. The higher the number, the faster the transmission speed.

NOTE: Set the transmission speed only when you know what speed is most suitable, such as when you are sending a fax to a foreign country and telephone line conditions are bad. If you do not know the line condition, do not change this setting.

Xerox WorkCentre C226 User Guide 5-71