Xerox WorkCentre C226 manual Address Review Opqrst Uvwxyz ABC Group

Storing, Editing, and Deleting Auto Dial Keys and Programs

3.Touch one-touch keys of the destinations that you wish to store in the group.

Touch index keys and the keys as needed.

Direct Address / Group

Select Address.

AB

	C Group			Xerox Corporation
	Corpo.Tps
								Address Review
Frequent Use		ABCD	EFGHI		JKLMN	OPQRST	UVWXYZ
									ABC	Group

•One-touch keys that have been touched are highlighted.

•If you touch the wrong key, simply touch it again to cancel the highlighting and remove the destination from the group.

NOTE: Keys that are greyed out are group keys. Group keys cannot be selected.

•To check the destinations that you have stored in the group, touch the [ADDRESS REVIEW] key.

N

A list of the destinations appears.

To delete a destination, touch the key of the destination and then touch the [YES] key in the message that appears.

Address Review

OPQRST UVWXYZ ABC Group

4.Touch the [OK] key in the screen of step 3.

You will return to the screen of step 2. The number of selected destinations will appear next to the [ADDRESS] key.

5.Check the name of the key (refer to step 13 on page 5-71).

The characters appearing next to the [KEY NAME] key will be displayed in the group key. To change these characters, touch the [KEY NAME] key. This step is not necessary if you do not wish to change the characters.

The procedure for entering characters is explained on page 5-90.

6.Touch the [EXIT] key when you have finished programming the group key. If you wish to program another group key, touch the [NEXT] key.

When you touch the [EXIT] key, you will return to the screen of step 4 on page 5- 67.

To store another group, touch the [NEXT] key.

Xerox WorkCentre C226 User Guide 5-75