Panasonic AW-RP50N Selecting the remote cameras to be operated, 1Set the MENU button to ON

Selecting the remote cameras to be operated

Up to five remote cameras to be operated can be selected using the CAMERA STATUS/SELECTION buttons.

When one of the CAMERA STATUS/SELECTION buttons 1 to 5 is pressed, the indicator of the corresponding button lights.

The statuses of the remote cameras assigned to CAMERA STATUS/SELECTION buttons 1 to 5 can be identified by the lighting statuses of the indicators above the buttons.

		1	2	3	4	5
MENU	PAGE	GAIN/PED	R/B GAIN	R/B PED	AWB/ABB	SHUTTER	F2	EXIT
		6	7	8	9	10
STORE	DELETE	DETAIL	SCENE/MODE	CAMERA	SETUP	SYSTEM	USER1	USER2
			PRESET MEMORY / MENU
		1	2	3	4	5
IRIS	AUTO		CAMERA STATUS / SELECTION					PT ACTIVE

Indicator lighting statuses and remote camera statuses

Indicator	Remote camera status	CAMERA STATUS/SELECTION button
lighting status		operation
	￿￿ No remote camera has been assigned to the corresponding button.
OFF	￿￿ No power is supplied to the remote camera.	Disabled
	￿￿ The LAN cable is not connected.
ON	The remote camera is in the standby status.	Enabled
(orange)
Blinking	Five other controllers are connected to the remote camera so the unit cannot	Disabled
(orange)	be connected.
ON	The unit is now connected with the remote camera.	Enabled
(green)
Blinking	Another device has selected the corresponding remote camera.	Enabled
(green)
ON (red)	The image of the corresponding remote camera is now on the air.	Enabled
Blinking	Another device has selected the corresponding remote camera, and the	Enabled
(red)	image of the camera is now on the air.

Up to 100 cameras can be divided into 1 to 20 groups by menu operations, and controlled by the unit.

The selection procedure is described below.

1Set the MENU button to ON.

Press the MENU button and light its indicator.

2Set the PRESET MEMORY/MENU 8 BUTTON (CAMERA) to ON.

When the button is pressed and its indicator is lighted, the [CAMERA] menu is displayed on the LCD panel.

[1]GROUP ▼

3Press the F1 dial.

The GROUP SELECT item is displayed.

[1]GROUP ▼

Press the F1 dial.

1.GROUP SELECT

1

4Turn the F2 dial, select the group, and then press the F2 dial.

The remote cameras assigned to the group selected here can be selected using the CAMERA STATUS/SELECTION buttons.

31