Panasonic AW-RP50N Table of menu items, Button, Menu item, Control device, Initial value, Setting

Table of menu items

	Button			Menu item			Control device	Initial value	Setting
9	SETUP	PTZ ADJ			P/T MIN SPEED				START
					Z MIN SPEED				0 to
					LIMIT UP		AW-HE50	Off	Off, On
							AW-HE100	EXEC	EXEC
							AW-PH360, AW-PH400,	EXEC	EXEC
							AW-PH405, AW-PH650
					LIMIT DOWN		AW-HE50	Off	Off, On
							AW-HE100	EXEC	EXEC
							AW-PH360, AW-PH400,	EXEC	EXEC
							AW-PH405, AW-PH650
					LIMIT LEFT		AW-HE50	Off	Off, On
							AW-HE100	EXEC	EXEC
							AW-PH360, AW-PH400,	EXEC	EXEC
							AW-PH405, AW-PH650
					LIMIT RIGHT		AW-HE50	Off	Off, On
							AW-HE100	EXEC	EXEC
							AW-PH360, AW-PH400,	EXEC	EXEC
							AW-PH405, AW-PH650
		GPI			EMERGENCY MD1				1 to 100
					EMERGENCY MD2				1 to 100
					EMERGENCY MD3				1 to 100
		LCD BL			BACKLIGHT			On	Off, On
		MENU CTL			MENU CONTROL			DISABLE	ENABLE, DISABLE
10	SYSTEM	CAMERA CTL			CAM1 to 100			NoAsign	Serial, Network, NoAsign
		CAM ASSIGN			CAM1 to 100				192.168.000.020
		SW ASSIGN			INPUT1				CAM1 to 100
					INPUT2				CAM1 to 100
					INPUT3				CAM1 to 100
					INPUT4				CAM1 to 100
					INPUT5				CAM1 to 100
		AUTO SET IP			AUTO SETUP			RENEW	RENEW, KEEP, ALL CLEAR
		NETWORK			IP ADDRESS			192.168.000.009
					SUBNETMASK			255.255.255.000
					GATEWAY			000.000.000.000
					MAC ADDRESS				Display only
		CAM	IP	ADR	IP:CAM1 to	100		192.168.000.020
		SW	IP	ADR	IP:SW			192.168.000.030
		ALARM			POWER				ALARM, NO ALARM
					CAM￿￿￿ (Note)				FAN ALM, P/T ERR,
									FAN ALM+P/T ERR
					CAM￿￿￿ (Note)				FAN ALM, P/T ERR,
									FAN ALM+P/T ERR
					CAM￿￿￿ (Note)				FAN ALM, P/T ERR,
									FAN ALM+P/T ERR
					CAM￿￿￿ (Note)				FAN ALM, P/T ERR,
									FAN ALM+P/T ERR
					CAM￿￿￿ (Note)				FAN ALM, P/T ERR,
									FAN ALM+P/T ERR
		INITIALIZE			INITIALIZE				ALL, SETUP
		VERSION			SYSTEM VER				V￿￿.￿￿.￿￿
					PROGRAM VER				V￿￿.￿￿.￿￿
					FPGA VER				V￿￿.￿￿.￿￿

Note: “￿￿￿” is the number of the camera in the selected group of cameras.

46